I just tried out DigiPan with my KX2 for the first time earlier today.
At first I thought it wasn't working because I couldn't decode any
signals on PSK31. Then I happened to stumble on a W1AW bulletin on
RTTY. Then they switched over to PSK31 and it decoded perfectly.
I guess the answer is that a lot of the signals on the air that sound
like PSK31 are actually something else.
By the way, PSK31 is symmetrical in frequency so it doesn't matter
whether you select LSB or USB. That's why the Reverse function in
DigiPan is disabled for PSK31.
When W1AW first switched from RTTY to PSK31, the KX2 was still in FSK
mode with the narrow filter. It decoded the PSK31 just fine. Then I
switched to LSB and it continued to decode perfectly.
Alan N1AL
On 3/9/2021 6:11 PM, Bob Liesen wrote:
All,
Pulling my hair out here. I have been trying to get my KX2 to work on
PSK31. After many attempts I got it working perfectly with DigiPan, but
I'm not sure how. Then something happened that I have found is a problem
for me with this radio. I must have turned a knob, hit a key or some such
thing as it stopped decoding. I find the knobs and buttons are too close
to one another for these old eyes and fingers.
I am using DATA A mode, I have the BW at 4kHz and center freq of 1.5 AGC
is off, RF gain is 0dB. NB and NR is off. I suspected I might have
screwed up the USB/LSB setting somehow, but HamScope has a "reverse"
function which does not help.
Is there anyone who could walk me through the settings that might be
screwing this up?
Tnx es 73
Bob WB0POQ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
