To add to what Jack said, several of us use Kenwood transceiver (TS-590 and
TS-890) with KPA500-KAT500 combos. The Aux cable is useless. To get the KPA500
to follow the radio frequency, here is the circuit of the homemade 9-pin cables
we are using: https://groups.io/g/TS-890/files/Kenwood_KPA500_KAT500%20Y%20cable.pdf
Mind you this is for Kenwoods (Elecraft copied their protocol). The amp will
query the radio VFO A for frequency and the dumb KAT500 will follow along. The
downside is the amp must be powered up to have the tuner track. Also you have
to fuss with some parameters in the KAT500 to keep it from switching tuning
solutions during a transmission when the frequency counter disagrees with the
serial data. (Reportedly a known bug, now completely off Elecraft's radar)
Personal opinion: I would think twice about trying to run this remotely.
Wes N7WS
On 7/5/2021 9:48 AM, Jack Brindle via Elecraft wrote:
Do you really need the 15-pin AUXIO cable? The ANAN doesn’t speak Auxbus, so
unless it outputs the BCD signals that the KPA500 (but not the KAT500) uses,
then the AuxIO cable won’t do you any good. Remember, the KPA and KAT do not
communicate. Instead you will need a pair of phono to phono cables for the PTT
signal, and perhaps a serial cable to go to the KPA500 if the ANAN speaks
Kenwood protocol.
Take a very good look at the current KPA500 manual for more information, and
make sure you can use the AUXIO cables before investing in them.
73,
Jack, W6FB
On Jul 4, 2021, at 6:37 PM, Dick Bingham <[email protected]> wrote:
Greetings to everyone
I am just getting started interconnecting my Apache-Labs ANAN-7000dle
to a KPA500, KTA500 and my DELL E6510 laptop for a base-station I
can operate remotely from another QTH.
Before I order several from Elecraft, does anyone have E850463 Aux Interface
cables that are surplus to you, you are willing to sell? These are the
15-pin "D"
connectors fitted with male and female thumb-screw-attached connectors ?
Contact me off-line at the email address shown above.
73 Dick/w7wkr
______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
