LOL. I bet you don't even know if the board is multilayer or not. I don't, and I'm not about to pull it out of the rig just to find out.
I had a KIO3 board go bad in the past and was lucky enough to be able to replace it then. Pretty certain I'm screwed if it happens again.
Dave AB7E On 11/26/2021 11:37 PM, Ray wrote:
Its done Every Day. Look at Russia and China ! Yes, it takes a very Special Skill set………….. Ray WA6VAB K3 *From: *David Gilbert <mailto:[email protected]> *Sent: *Friday, November 26, 2021 3:37 PM *To: *[email protected] *Subject: *Re: [Elecraft] Need K3 Board Would you try to replicate that board from that schematic without having access to the artwork for the board?? No frigging way. It has to fit into a fairly small space. Dave AB7E On 11/26/2021 3:53 PM, Ray wrote: > The schematic is Published, Check the Elecraft K3 site. > Ray WA6VAB K3 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
