Guys,
I'm not about to remove all of the cables to look but using my iPhone camera it
looks like I have S/N 1418, which I kit-built.
My R7 is AWOL and R6 measures about 228 Ohm.
Looks like Elecraft needs to explain.
Wes N7WS
On 12/10/2021 8:25 AM, Andy Durbin wrote:
Hi Lyn,
Thanks for your report. Your KAT500 is a later serial than mine so I doubt R7
is fitted. (Mine was a kit build and I don't know if factory units are in the
same serial number series)
I don't know the source of my Rev C schematics. I received some of my
KAT500/KPA500 from Elecraft support and some by an internet search. I assume
there must be a later version that documents the elimination of R7.
73,
Andy, k3wyc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
