The station is working as it should. I checked all the ideas. Still no joy. Turned it off and went to supper. I came back and turned everything on it worked as it should. Maybe just needed a reboot. Thank everyone for your ideas.
Larry NA0F Sent from my iPhone > On Jan 25, 2022, at 4:23 PM, [email protected] wrote: > > > I have a K3,KAT500 and KPA500. I had a station on 10 Meters this afternoon > that I wanted to reach. > > The KPA500 did not work on 10M as if it was in standby mode (it was not), the > KAT500 tuner didn't tune either the K3 showed 1.0-1 5W all across the 10m > band but no relays clicks in the KAT500. I tested after this happened and > both work as expected on all other bands. It has been years since I used 10M. > The firmware is current on all three units. > > Any thoughts or ideas. > > TIA > > Larry NA0F > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
