Andrew,
That sounds like you had the NB and/or NR set on in the KDSP2 with
aggressive settings.
If the settings were aggressive, it would give you 'scratchy' audio -
but it does eliminate other unwanted signal sounds. You might want to
put the KDSP2 in again and try several settings - see the KDSP2 manual.
Start with all settings at default and go from there.
73,
Don W3FPR
On 2/17/2022 3:55 PM, Andrew Moore wrote:
I replaced the KDSP2 with a newly built KAF2 today and am happy to report
the noise is gone. Not sure if the board swap had anything to do with it,
but everything sounds great now and hope that continues.
Thanks,
-Andrew / NV1B
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
