Hi Don - thanks for the suggestion. Any idea if the scratchy audio would persist if the KDSP2 was put into bypass mode? I tried that and scratchy audio was still there.
Thanks, -Andrew On Sat, Feb 19, 2022 at 8:49 PM Don Wilhelm <[email protected]> wrote: > Andrew, > > That sounds like you had the NB and/or NR set on in the KDSP2 with > aggressive settings. > If the settings were aggressive, it would give you 'scratchy' audio - > but it does eliminate other unwanted signal sounds. You might want to > put the KDSP2 in again and try several settings - see the KDSP2 manual. > Start with all settings at default and go from there. > > 73, > Don W3FPR > > On 2/17/2022 3:55 PM, Andrew Moore wrote: > > I replaced the KDSP2 with a newly built KAF2 today and am happy to report > > the noise is gone. Not sure if the board swap had anything to do with it, > > but everything sounds great now and hope that continues. > > > > Thanks, > > -Andrew / NV1B > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
