What preamp are you using? Specifically, what are you trying
to accomplish?
The basic answer is: connect RX Ant Out to the preamp input and
connect the preamp output to RX Ant In. Activate (tap) RX ANT
to toggle the external preamp in/out.
If the preamp has its own bypass relay you can use CONFIG:DIGOUT1
(and any necessary external circuitry) to bypass the preamp on
a per band basis. See: CONFIG:DIGOUT1 in the K3/K3S Owner Manual.
73,
... Joe, W4TV
On 2022-08-31 8:33 AM, John Stengrevics wrote:
I was told that a preamp can be connected across the RX ANT IN/OUT jacks and
that certain settings are then changed to make this work.
However, I cannot find anything in the manual or the Cady book that discusses
this.
Appreciate any comments.
John
WA1EAZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com