Thanks all for the helpful comments. Don, I will try to call you this afternoon if you have time.
John WA1EAZ > On Aug 31, 2022, at 9:34 AM, Joe Subich, W4TV <[email protected]> wrote: > > > What preamp are you using? Specifically, what are you trying > to accomplish? > > The basic answer is: connect RX Ant Out to the preamp input and > connect the preamp output to RX Ant In. Activate (tap) RX ANT > to toggle the external preamp in/out. > > If the preamp has its own bypass relay you can use CONFIG:DIGOUT1 > (and any necessary external circuitry) to bypass the preamp on > a per band basis. See: CONFIG:DIGOUT1 in the K3/K3S Owner Manual. > > 73, > > ... Joe, W4TV > > > On 2022-08-31 8:33 AM, John Stengrevics wrote: >> I was told that a preamp can be connected across the RX ANT IN/OUT jacks and >> that certain settings are then changed to make this work. >> However, I cannot find anything in the manual or the Cady book that >> discusses this. >> Appreciate any comments. >> John >> WA1EAZ > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
