George,
do you have a 2nd RX installed? If so check the signal at the AUX input
with your 2nd RX after re-routing the signal path.
If not I can say from my experience with my three K3's it's the
notorious D25 in 99%.
73 Udo, DK5YA
Am 12.10.2022 um 18:54 schrieb George Fremin III:
I have a K3 that has gone deaf. It can bearly hear my XG1 at 50 uV
plugged into either the RX or ANT-1 ports.
It does not have an antenna tuner.
I have removed KXV3 option and put jummpers in W1 and W2.
It remains deaf.
From doing some reading I see that D25 could be the issue.
Is there a way for me to prove that or do I just need to replace D25
to find out?
I do notice that if I touch some areas on the bottom board the signal
does increase.
Thanks
--
******************************************
Webs by DK5YA: *
http://www.mmmonvhf.de/ [editor]*
http://www.vhfdx.de/ [owner] *
http://www.palekastro.de/ [owner] *
http://www.solweb.de/ [owner] *
http://www.spessartwetter.de/ [owner] *
******************************************
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
