Dave I saw that. And I have poked around
I think d25 is the most likely based on what I see. The part numbers in that post are the same for both d5 and d25 so I think one of them is incorrect. I might try tracing the signal a bit more to prove it is d25. I removed and jumpered the kvx3 so it is not d5 George Fremin III > On Oct 12, 2022, at 6:49 PM, David Hachadorian <[email protected]> wrote: > > Hi George, > > Maybe the second paragraph from Elecraft here will help: > https://marc.info/?l=elecraft&m=145323127930319&w=2 > > 73 > > Dave Hachadorian, K6LL > Yuma, AZ > > On 10/12/2022 9:54 AM, George Fremin III wrote: >> I have a K3 that has gone deaf. It can bearly hear my XG1 at 50 uV >> plugged into either the RX or ANT-1 ports. >> >> It does not have an antenna tuner. >> >> I have removed KXV3 option and put jummpers in W1 and W2. >> >> It remains deaf. >> >> >From doing some reading I see that D25 could be the issue. >> >> Is there a way for me to prove that or do I just need to replace D25 >> to find out? >> >> I do notice that if I touch some areas on the bottom board the signal >> does increase. >> >> Thanks >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
