In more troubleshooting, I'm finding that when I switch my KX3 to PA mode ON, the KX3 is only putting out around 2 to 3 watts output to the KXPA100.
But then when I swtich the PA mode to off and change the power button to 5 to 15W output, the correct amount of RF is output from the KX3. Is there a setting to boost the power when PA mode is on? Thanks Kyle That sounds right, so the PS is working OK. According to the manual you need only 3.5 - 7 W drive for 100W output. Have you checked that 3dB attenuator, Pin, RF Drive, is in the OUT/AUTO position? Bert VE3NR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
