[reposted because the list blocked an OpenPGP/MIME signature] Kyle Krieg <[email protected]> writes:
> In more troubleshooting, I'm finding that when I switch my KX3 to PA mode > ON, the KX3 is only putting out around 2 to 3 watts output to the KXPA100. > > But then when I swtich the PA mode to off and change the power button to 5 > to 15W output, the correct amount of RF is output from the KX3. > > Is there a setting to boost the power when PA mode is on? There is a feedback loop on output power, and I would expect drive to be adjusted for that. It seems like the KXPA100 is perceiving that output power is higher than it is. Either that or your power meter is off the other way. What happens if you command the output power to 20W, 50W, 75W when using the KXPA100? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
