Scott, Do not install anything at C167. With the Rework Eliminators, you should find a header for J11 - install that, and the jumper they are referring to is on the board that plugs into that J11 header.
73, Don W3FPR > -----Original Message----- > > HI > I'm a little confused, which is not unusual for me, on the last > item on page 50 of the assemble manual for the K2. > It says - Install C167 (.001 uf "102") which is near J11, the > connector for the SSB adapter. The leads on this capacitor should > be formed to match its PC board outline. > The un-module manual say don't install C167 and install a jumper > at J11. > I'm inclined to believe that it is saying to install a jumper instead > of C-167. Is this correct. Sure would hate to smoke a PCB by putting > a jumper where it shouldn't be. > Any help would be appreciated. > Scott N5SM > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
