I've found the audio filter/DSP one to be very convenient when doing work on the front panel/control boards, since things can be tested without having to reassemble that stack, or probed behind where it would be.
73, doug From: "Mike Short" <[EMAIL PROTECTED]> Date: Tue, 28 Nov 2006 19:23:28 -0600 Tom, They are listed at the bottom of the Elecraft website. I put them in my K2, and they are great. What they are is a board that plugs in to the connectors for the various option modules, KSB2, KNB2, KAF2, etc. You can do them as you assemble the K2, or go back after it is finished and install them. They are great for troubleshooting, since all you need to do is unplug the suspect module and verify operation. I had an issue with my KSB2 board, and it was great to be able to simply unplug it. If you do not have the rework eliminators installed you must solder in jumpers, and other steps to remove a module. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
