OK I just have to ask: What the heck are Rework Eliminators? I am just starting a K2/100, and will be building it for some time. In the mean time, I have been watching this list (an outstanding resoucer, I might add), and Rework Eliminators come up from time to time. I am dying to know what they are, and if they are something I need to help with my move into K2 land.
73, Tom KG3V Quoting Don Wilhelm <[EMAIL PROTECTED]>: > Scott, > > Do not install anything at C167. With the Rework Eliminators, you should > find a header for J11 - install that, and the jumper they are referring to > is on the board that plugs into that J11 header. > > 73, > Don W3FPR > > > -----Original Message----- > > > > HI > > I'm a little confused, which is not unusual for me, on the last > > item on page 50 of the assemble manual for the K2. > > It says - Install C167 (.001 uf "102") which is near J11, the > > connector for the SSB adapter. The leads on this capacitor should > > be formed to match its PC board outline. > > The un-module manual say don't install C167 and install a jumper > > at J11. > > I'm inclined to believe that it is saying to install a jumper instead > > of C-167. Is this correct. Sure would hate to smoke a PCB by putting > > a jumper where it shouldn't be. > > Any help would be appreciated. > > Scott N5SM > > > > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
