The band-switch will "remember" the current settings Right Now. Any change of band causes the current band's settings to be memorized. If you need to "speed up" the 30-second memory for some reason, a bandup/banddown will do so.
Dan / WG4S / K2 #2456 <snip> There is the '30 second rule' that you have to contend with. The K2 waits 30 seconds after you have tuned to a new frequency, set a new mode, etc. before it sets those parameters into memory. So if you tune to a spot and then quickly turn power off, it will not remember your settings. Wait a while (30 seconds seems like forever if you are in a hurry), and it will behave just like the manual says. 73, Don W3FPR </snip> _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com