Kevin, You are OK - check the Rev D manual and its errata sheet and you will find the range has been changed to 11 to 16 ohms.
73, Don W3FPR > -----Original Message----- > > My daughter and I are slowly assembling a KPA100 Rev C. We are at the > alignment and installation resistance checks, and the bases of Q1 and Q2 > measure 11.4 ohms. The manual gives 12-16 ohms. Looking at the schematic, > it seems that the resistance for Q2 base should be the resistance of R9 > (10 ohms) in series with the combination of R20 (1.6 ohms) in parallel > with the series combination of R34 (10 ohms) and R19 (1.6 ohms). This > works out to 11.4 ohms. 5 percent tolerances all working together might > get this to 12 ohms, but its hard for me to see how anyone would ever > get a resistance in the specified range. Am I missing something or is > the manual wrong? > > 73 Kevin w9cf > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.15.26/597 - Release Date: 12/21/2006 6:45 PM _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
