Maybe. When I did my Rev D KPA100 a few weeks ago, only ONE of the resistances was changed to read 11 - 16 in the errata. The other still said 12 - 16. Maybe the errata has been update in the last few weeks? In my case, both transistors measured 11.5 ohms and the rig works fine. 73! - Keith N1AS - - K2 5411.ssb.100 -
________________________________ From: [EMAIL PROTECTED] on behalf of Don Wilhelm Sent: Sat 12/23/2006 12:25 PM To: Kevin Schmidt; [email protected] Subject: RE: [Elecraft] KPA100 Final Transistor base resistance Kevin, You are OK - check the Rev D manual and its errata sheet and you will find the range has been changed to 11 to 16 ohms. 73, Don W3FPR _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
