In a recent message, Lyle Johnson <[EMAIL PROTECTED]> wrote ...
I wonder if there is a list available of the K3 features that are NOT
yet activated in the current firmware.
Check the errata sheet that came with the radio. As features are
added, they'll be listed in the firmware updates, viewable through the
K3 Utility.
Many thanks, Lyle, but no mention of any missing features in the Errata
sheet that I got with my kit. (Rev. C-3, November 26, 2007)
...I am unable to enable synchronous detection in AM mode.
Not yet available. You can use USB or LSB and FINE tuning for the
moment, as the K3 is very stable and most AM transmissions are as well.
Thanks again. Yes, AM medium wave broadcast (even music) sounds good in
USB/LSB modes.
...The bandwidth control only goes up to 3kHz on AM, but goes up to
6kHz on other modes. Is this normal...
WIDTH refers to the fianl audio bandwidth. IF is 1:1 to the IF
bandwidth in CW, SSB and DATA modes. AM IF bandwidth is twice the
audio bandwidth. FM will have a fixed IF bandwidth, at least
initially, and WIDTH will refer to the AF response only.
Excellent - that confirms #00186 is working okay.
73
--
David G4DMP
Leeds, England, UK
------
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
