Some time ago, I had standardized on the standard size 4 pin flat Molex
connector. On low drain (less than 10 amps peak) I just used two pins, 1
and 4. For high drain 100 watt rigs, I used all 4 pins, 1,2 in parallel, 3
and 4 in parallel. This worked fairly well and everything I had used these.
The Anderson connectors seemed much more compact and I have had no troubles
except trying to mate Tyco "AMP" copies with the APP connectors. I found
the Tyco stuff's quality was very poor compared with Anderson. I have had
NO troubles with the roll-pins keeping the connectors from sliding apart. I
usually crimp mine using a "universal" AMP hand tool I've had for years.
You have to be careful after crimping and pay attention that the tongue of
the connector isn't bent up or down too much to allow the spring in the body
of the connector to function properly.
I've converted everything to them and they have worked well for me.
73 to all,
Sandy W5TVW
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, April 06, 2008 10:07 PM
Subject: [Elecraft] Alternatives to PowerPoles?
In a message dated 4/6/08 11:00:03 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
APPs are bad design, bad technology, just bad.... why?
What would you use instead? Particularly given the desire for a genderless
connector that can carry considerable current (20+ Amps)?
Not trying to argue, just wondering about alternatives. Ten Tec and some
others use Molex but they're not genderless, they're one-use, etc.
73 de Jim, N2EY
**************
Planning your summer road trip? Check out AOL
Travel Guides.
(http://travel.aol.com/travel-guide/united-states?ncid=aoltrv00030000000016)
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.8/1363 - Release Date: 4/7/2008
8:56 AM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
