Hi again, It's been a little while. I had to investigate this in order to be completely comfortable with short circuiting the right channel with my mono to stereo adapter. The schematic for the KIO3 module shows a 604 ohm resistor in series with the output, so that puts this to rest. I could also verify this with an ohm-meter. The schematic is a little misleading (the pdf file) as it shows the same ground symbol on the secondary side of the transformers as on the primary side. I have verified with my ohm-meter that the line out is indeed completely floating with respect to the various grounds found on the transceiver (such as the coax connectors). This is good. I am assuming that some detail in the schematic has been lost in the ORCAD to PDF conversion. (If these schematics are not created by ORCAD, I'll eat my hat.)
Knut - Ab2tc M0XDF wrote: > > can on a Mac :-) > > <snip> > > -- View this message in context: http://www.nabble.com/Line-out-tp16532181p16622969.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
