today I observed a problem with my K3 ATU. on some bands the ATU does not find a fix. I connected the transceiver to a 50 ohm 100 Watt dummy load.
I tried on 1850 - no fix - rattle rattle - display says: - . - with Xmit: 1.0 - 1 3700 - quick fix 1.0 - 1 5330 - no fix but when I press transmit it shows 1.2 - 1 1.0 ATU in bypass 7080 - no fix with xmit 1.0 - 1 10142 - no fix with xmit 1.4 - 1 (tuner inline - 1.0 - 1 tuner bypass) 14142 - quick fix 1.0 - 1 18068 - quick fix 1.0 - 1 21000 - quick fix 1.0 - 1 24890 - quick fix 1.0 - 1 28000 - quick fix 1.0 - 1 50750 - quick fix 1.0 - 1 second problem: I have the impression that the switch from Mic high and low level does not work anymore. I observed a low power output (about 40W max) with Mic high sensitivity, and no change when I switch to low. Front and Back panel is the same. I hope I can get a hint where to look. 73! de Werner OE9FWV -- Failing to plan is planning to fail. Email powered by Pegasus Mail free at <http://www.pmail.com> Homepage: <http://www.qsl.net/oe9fwv/> Fone +43 5522 75013 Fax +43 820 555 85 2621 Mobile +43 664 6340014 Elecraft K2 #5203 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
