Hi again, Werner:
I can't speak to what you might see on your LP100 meter. I know nothing
about it except that is held out to be good! Since I have very little
experience with SSB, I'd best not suggest what might be normal :-).
I have a Diamond SX-200 wattmeter and in the Averaging position I see a
max of about 45 - 50 watts and in the so-called PEP position I see
anywhere between 60 and 90 watts indicated. That is with the Heil ProSet
from Elecraft, mic gain set to 8, and Compression set to 16.
73,
Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~
Dr. Werner Furlan wrote:
hi Ken,
Ken K3IU schrieb am 28 Apr 2008 um 14:20:
With respect to your second problem, the mic high / low setting is
working on #202 with latest firmware. It is easy to demonstrate if you set
the MAIN:MIC SEL to high (rP.H in my case), set compression to zero(0), and
MIC gain to zero(0), and the METER to display the ALC. Tap the XMIT button
to key transmitter, speak into mic and increase the MIC gain to produce an
ALC indication of 4-5. Then reset the the MAIN:MIC SEL to low (rP.L in my
case). Now, without changing the MIC gain or the compression, tap the XMIT
button and speak into mic. I see no ALC action at this time. This clearly
indicates that the high / low setting is working. 73, Ken Wagner K3IU K3
you are right!
with this method I find the same performance like you.
Is a maximum power output of 45 Watt peak in SSB normal?
(mesured with a LP100)
Power with CW is showing 100W with the same instrument.
73! de Werner OE9FWV
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
