hi Ken, Ken K3IU schrieb am 28 Apr 2008 um 14:20:
> With respect to your second problem, the mic high / low setting is > working on #202 with latest firmware. It is easy to demonstrate if you set > the MAIN:MIC SEL to high (rP.H in my case), set compression to zero(0), and > MIC gain to zero(0), and the METER to display the ALC. Tap the XMIT button > to key transmitter, speak into mic and increase the MIC gain to produce an > ALC indication of 4-5. Then reset the the MAIN:MIC SEL to low (rP.L in my > case). Now, without changing the MIC gain or the compression, tap the XMIT > button and speak into mic. I see no ALC action at this time. This clearly > indicates that the high / low setting is working. 73, Ken Wagner K3IU K3 you are right! with this method I find the same performance like you. Is a maximum power output of 45 Watt peak in SSB normal? (mesured with a LP100) Power with CW is showing 100W with the same instrument. 73! de Werner OE9FWV -- Good judgment comes from experience, and a lot of that comes from bad judgment. Email powered by Pegasus Mail free at <http://www.pmail.com> Homepage: <http://www.qsl.net/oe9fwv/> Fone +43 5522 75013 Fax +43 820 555 85 2621 Mobile +43 664 6340014 Elecraft K2 #5203 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
