Subject: RE: [Elecraft] VOX sensitivity problem with new firmware
I too noticed a large change in setting up TX power control with the
new firmware.
Now am running mic at 15, cmp at 5 and vox gain at 70 in order to
have smooth operation.
txg vce is now .5dB.
These settings are greatly different than my previous settings.
Had trouble keeping the alc in range with the mic gain and so had to
go to the rather high vox gain. This certainly seems to indicate less audio
signal is being generated to drive the following circuitry. Seems to be
working fine at the new settings but haven't yet been able to have another
station tune through my signal to see if I have any whiskers......
Take care 73 Gil K8EAG
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
