Interesting that the mod levels of the board aren't reflected by the serial number.
Yes, I am waiting for the second receiver too. Going with the stock 2.7KHZ filter for the moment as the main use I have for the second receiver is listening to the "split" frequency. 73, N2TK, Tony -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of F5VJC Sent: Wednesday, May 28, 2008 1:01 PM To: [email protected] Subject: Re: [Elecraft] K3 - HAGCMDKT mod kit I installed the HW AGC mod yesterday on K3 325, it was not fitted. I opted for the SMD components, and all went fine but I decided to use the standard LED as I was unsure of the cathode marking on the supplied SMD LED. This ought to be indicated on the instruction sheet I think. Also fitted the KXV3 RXA mod. All now back together and working just fine. Waiting for the second RX now and debating filter options. 73 Deni, F5VJC Went to install the HAGCMDKT kit on #311. Interesting but all was already done except for shorting R33 and R40. Maybe there were interim fixes for this mod? By the way, C222 had already been changed to .1 uF for the CW Keying Rise Time Reduction. I needed to add the RXA board to the KXV3. N2TK, Tony #311 ----- 73, Deni F5VJC K2 1188 K3 325 For a Ham Radio friendly holiday in France... Visit www.mycottageinbrittany.com -- View this message in context: http://www.nabble.com/K3---HAGCMDKT-mod-kit-tp17517042p17517381.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
