Hi Mike, Yes I did not read your message carefully enough. I had a similar problem as I wrote, but that wasn't in the tune mode. Your problem has been solved easily :-)
I'll try solving my problem again next weekend. Thanks for e-mail! 73's, Evert PA2KW -----Original Message----- From: Mike Short [mailto:[EMAIL PROTECTED] Sent: Monday, June 02, 2008 01:00 To: [EMAIL PROTECTED] Subject: RE: [Elecraft] K2 /100 RF output varies According to Don, W3FPR: "Mike, Check the KPA100 manual - during TUNE the power is reduced to 20 watts. If you need to TUNE at full power, you can either press the TUNE and DISPLAY buttons together, or rotate the power knob to the power level desired after the TUNE operation has started. 73, Don W3FPR" Operator Error on my part, Mike No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.4/1476 - Release Date: 5/31/2008 12:25 PM _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
