Jerry,
How did you wire your interface?
Did you use "Band Data 1" (DIN8/262) or "Band Data 2" (DB15)
on the Quadra?
What are the symptoms ("No go")?
Remember, the pin numbering on "Band Data 1" (DIN8/262) is
different than the standard DIN8 - pin 6 on the standard
connector is pin 7 ("D") on the 262, pin 7 on the standard
is 8 (inhibit) on the 262, and pin 8 on the standard is 6
("C") on the 262
My Quadra is still in storage ... I have not hooked it up
yet but may cobble together a cable this week to try it.
73,
... Joe, W4TV
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Flanders
> Sent: Saturday, June 14, 2008 1:30 PM
> To: [email protected]
> Cc: [EMAIL PROTECTED]
> Subject: [Elecraft] K3 and Quadra amp
>
>
> Anybody have the band data cable working? I carefully wired mine up
> but no go. Sure would be nice to KNOW it can be made to work.
>
> Jerry W4UK
>
> _______________________________________________
> Elecraft mailing list
> Post to: [email protected]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
