Don Wilhelm wrote:
Ian,
Based on information I received from Wayne, I do believe that K3 ACC
pin 7 is now dedicated to TX INH. There were complication in sharing
it. If the change is not in the firmware version you are using, it
will be with a forthcoming update. In other words, it cannot be used
for XVTR ON. The +12 volt output from the back of the K3 should do
nicely even though it means "Y"ing out one of the cable wires.
Hi Don,
Thanks for the update. I am running 2.02 and the rest of the latest
firmware. I have been merrily using my transverter but not for a few
weeks as I moved the shack around and need to make up another power
cable. If this is the case, can we have a heads up from Elecraft please?
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
