Steve, This is correct - it works great - I have run mine at 38400 or 4800 either way with a standard serial cable with db9 and I have the USB interface which configures fine also!
73 de Bill N4ZI --- On Mon, 7/28/08, Stephen Reichlyn <[EMAIL PROTECTED]> wrote: > From: Stephen Reichlyn <[EMAIL PROTECTED]> > Subject: [Elecraft] K3 interface with N1MM > To: [email protected] > Date: Monday, July 28, 2008, 5:43 PM > Good Evening, All > > I'd like to interface my K3 to N1MM. Am I assuming > correctly that one needs > only connect the rig's RS232 port to a serial port > on the computer to get full radio control AND CW sending? > If not, an RS232 > cable from K3 to computer and LPT1 keying interface > from computer to rig? > > Regarding RTTY, can I use a 15 pin video cable with the > correct wires > connected for FSK using a DXP38 modem? > > Any hints would be gratefully appreciated. > > Thanks > Steve AA4V > K3 #855 > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
