Yes, you could. You would not have the RX ANT jacks, though. I use the RX ANT
jacks for a lot of my testing and other things.
Larry N8LP
Message: 41
Date: Thu, 07 Aug 2008 16:05:35 -0700
From: Iain MacDonnell - K6IAM <[EMAIL PROTECTED]>
Subject: Re: [Elecraft] K3: cheapo substitute for KXV3?
To: Burl <[EMAIL PROTECTED]>
Cc: Elecraft Reflector <[email protected]>, DOUGLAS ZWIEBEL
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
With this cable for the IF out, would one be able to feed a LP-PAN with
full functionality without the KXV3 option?
~Iain
Burl wrote on 08/07/08 15:39:
> You can purchase the cable (pn850292 @$3.10) from Elecraft that will
> plug into the bottom of RF board at P86. This is the same cable used
> for the KXV3 option. It has the 2 pin connector on one end and the
> other end can be soldered to a BNC connector. A BNC connector can
> easily be mounted in the location of the blank plate that would be used
> for the KXV3 option on the back of the radio.
>
> Burl AJ9Q
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
