Hi Steff, Thanks reply.
Try this. Set your K3 up to display dBV. Turn your K3 off. Turn the K3 on. Look at the value. Wait. See if it ever changes from +99.9. It never does here. This works: Have any other parameter displayed in the VFO B area. Turn rig off. Turn it on. That parameter does display. Then turn VFO B to display dbV. In a matter of seconds, it displays OK. It is like the K3 doesn't know the dBV display option has been selected at startup-- at least here. No big problem of course. 73 de Brian/K3KO Steef PA2A wrote: > > Brian, > > You have to let the AFV value stabilize first, and then the dBV shows the > value compared to the last AFV value. Page 36 of the manual shows more > details. > > 73 's Steef PA2A > K3 1184 > > ----- Original Message ----- > From: "alsopb" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, September 16, 2008 2:47 PM > Subject: [Elecraft] K3 dbV in 2.38 > > >> >> When turning on the K3, the dbV readout (AGC off) reads +99.9. Tech menu >> is >> on and other parameters one can display are OK. >> >> It doesn't change until I get impatient and start tuning around, turning >> menu main on/off or switching between parameters with the VFO B knob. It >> is >> not clear what brings it to life. ( A two minute wait alone does not do >> it.) >> After that it works properly. >> >> Anybody else seeing this? >> >> 73 de Brian/K3KO >> >> >> -- >> View this message in context: >> http://n2.nabble.com/K3-dbV-in-2.38-tp1092599p1092599.html >> Sent from the Elecraft mailing list archive at Nabble.com. >> >> _______________________________________________ >> Elecraft mailing list >> Post to: [email protected] >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com >> > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://n2.nabble.com/K3-dbV-in-2.38-tp1092599p1093680.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
