The mode on VFO B is USB or LSB (look at the mode indicator in the LCD while holding the REV button). This is a side effect of the K3's failure to copy the mode to VFO B on the first tap of the A->B button.
In order to keep both VFOs on the same mode, you need to tap A->B twice. The first tap copies only the frequency and the second tap copies everything else (mode, filter settings, antenna selection, etc.). The failure to copy mode has been loudly debated several times. 73, ... Joe, W4TV > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Rick Dettinger > Sent: Monday, September 22, 2008 5:42 PM > To: [email protected] > Subject: [Elecraft] K3 VFO split problem > > > My K3, Serial Number 556, is not working properly in the VFO split > mode. I only work CW and when I hold split, the CW speed control > light changes to the MIC light. The transmitter will then > not key. > Switching back to transceive restores the ability to key the > transmitter. This happens on all bands except 80, 40, and 30 > meters. On these three bands, everything works as it should. This > might be a clue, as these are the only bands I normally use. I just > found this out today when I went on 20 meters. I usually use split > instead of RIT, as I prefer to use the larger knob. My firmware is > 02.39 and 01.91. Any ideas? Did I not set up all the bands > correctly? > > Thanks and 73 > Rick Dettinger K7MW > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
