I have been reminded that the RIT uses a different encoder - sorry for
the confusion. Maybe I can write it off as a 'senior moment' - please
excuse me for not checking the parts list first.
73,
Don W3FPR
Rick and Theresa Low wrote:
Hello Don,
The encoder in the VFO B spot does not change VFO B displayed frequency (and
does not change any of the menu items, either.
Thanks for the reply.
73 Rick N6CY
Reston, VA
-----Original Message-----
From: Don Wilhelm <[EMAIL PROTECTED]>
Sent: Sep 27, 2008 6:53 PM
To: Rick and Theresa Low <[EMAIL PROTECTED]>
Cc: [email protected]
Subject: Re: [Elecraft] Loss of VFO B encoder control
Rick,
Does the VFO B knob change the frequency of VFO B? If it does, there is
nothing wrong with the encoder, and you should send a note to
[EMAIL PROTECTED]
If not, swap the encoder between VFO B and RIT (or VFO A and VFO B
whichever is easiest for you) - if the problem follows the encoder
position, ask for a replacement encoder.
If the problem stays with VFO B, then there is a front panel problem and
you should ask [EMAIL PROTECTED] for additional assistance.
73,
Don W3FPR
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
