This is a high priority and Wayne is working on it now. But it is NOT a trivial matter and requires a lot of code. When it's ready it will be announced on the reflector.
------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 On Tue Oct 14 13:22 , "Igor Sokolov" sent: >What a surprise! Cross band operation with 2 VFO is implemented even in my >IC7000. I thought it is available in K3 as well especially with 2 complete RX >build in. >Well I hope it will not take long to update the firmware to implement this >feature because my K3 with KRX3 is on the way here and I was intending to use >these 2 receivers to monitor 2 bands simultaneously. >\ >73, Igor UA9CDC > > >> Ted, >> >> It has always worked like that. If you previously had VFO A and VFO B >> showing different bands, I would think you had a display problem. >> Currently even with the KRX3 installed, cross-band operation is not yet >> implemented in the current firmware, but is being addressed as a planned >> future firmware addition (only for those with the KRX3). >> >> 73, >> Don W3FPR >> >> wa6riv wrote: >>> I updated my firmware and caused a problem. I have not purchased a sub >>> receiver and is not installed. >>> When I'm in VFO A, and do a band change, VFO B follows the same band. >>> I can swap A=>B or B=>A, move from A to B or B to A. >>> But I can't have VFO A on 40 meters and VFO B on 20 meters. >>> The Band switch transfers both VFO's to the same band at the same time. >>> What have I done? Tnx Ted >>> WA6RIV >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> Elecraft mailing list >>> Post to: [email protected] >>> You must be a subscriber to post to the list. >>> Subscriber Info (Addr. Change, sub, unsub etc.): >>> http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/subscribers.htm >>> Elecraft web page: http://www.elecraft.com >>> ------------------------------------------------------------------------ >>> >>> >>> No virus found in this incoming message. >>> Checked by AVG - http://www.avg.com Version: 8.0.173 / Virus Database: >>> 270.8.0/1722 - Release Date: 10/13/2008 7:50 AM >>> >>> >> _______________________________________________ >> Elecraft mailing list >> Post to: [email protected] >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com > >_______________________________________________ >Elecraft mailing list >Post to: [email protected] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
