Hi all, I see the lack of crossband A/B switch as a real shortcoming of the K3. I am used to using the A/B switch for a quick excursion to another band to check for band conditions. I realize that with crossband *split* operation, full QSK is not possible because of the many relays involved, but crossband A/B switching should be child's play even without the subreceiver. Please, Elecraft, fix this, even on units without the subreceiver. I don't think there is another transceiver on the market that doesn't allow this. My $450 IC-718 certainly does.
Knut - AB2TC Igor Sokolov-2 wrote: > > What a surprise! Cross band operation with 2 VFO is implemented even in my > IC7000. I thought it is available in K3 as well especially with 2 complete > RX > build in. > Well I hope it will not take long to update the firmware to implement this > feature because my K3 with KRX3 is on the way here and I was intending to > use > these 2 receivers to monitor 2 bands simultaneously. > \ > 73, Igor UA9CDC > > >> Ted, >> >> It has always worked like that. If you previously had VFO A and VFO B >> showing different bands, I would think you had a display problem. >> Currently even with the KRX3 installed, cross-band operation is not yet >> implemented in the current firmware, but is being addressed as a planned >> future firmware addition (only for those with the KRX3). >> >> 73, >> Don W3FPR > <snip> > ----- AB2TC - Knut -- View this message in context: http://n2.nabble.com/VFO-A-tracks-VFO-b%2C-Help-tp1331522p1334784.html Sent from the [K3] mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
