Hello Fern,
I rarely use the voice modes (except at FD), so having one good hand mike
(and yes, I did adjust the tx eq) is quite enough for me.
However I'd be happy to listen to your two mikes on the air if that is what
you have in mind.
73,
Erik K7YV
----- Original Message -----
From: "Fern Rivard" <[EMAIL PROTECTED]>
To: "Erik N Basilier" <[EMAIL PROTECTED]>; "Elecraft Reflector"
<[email protected]>
Sent: Wednesday, November 05, 2008 8:17 AM
Subject: re elecraft mics
Good morning Erik: If you would like a good comparison between a dynamic
mic and the MH-2 electret mic, I would be glad to do it with you. I am using
a dynamic mic normally used with a commercial vhf/uhf mobile which also has
the UP/DOWN keys and have compared with the electret MH-2 hand mic and there
is really no comparison. With the MH-2, I have to fiddle around with the
transmit audio equilizer while the dynamic mic is perfect as is.Now a
problem with the MH-2 is that the curly cord is way too stiff while the
dynamic mic that I use has a nice long super flexible curly cord. I have
also tried a Kenwood dynamic hand mic but found that the audio from that mic
really sucked as it has way to much bass which can be compensated some but
it still is no match for my commercial hand mic. 73 from Fern with K3 #412
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
