I just reloaded firmware suite 2.67/1.96 and the problem exists there as
well. I guess I have just never turned ON the K3 with a good signal on
the VFO freq. One other thing I checked... with the AF Gain at minimum,
the artifact is not there, but with even the smallest amount of AF Gain,
the loud burst occurs and the "loudness" of the burst is a function of
the AF Gain setting.
73,
Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~
Ken K3IU wrote:
I just tried power Off/On using earphones with speakers muted.I hear
the same loud artifact with the earphones and through the speakers
when there is a signal on the vfo freq.
73, Ken K3IU
Ken K3IU wrote:
I notice the same thing, but only when there is a signal on the
frequency tuned in on the K3 when power is turned ON. AF gain set at
about 9 o'clock, CONFIG:AF GAIN HI. With no signal on the tuned
frequency, the loud audio does not happen. I did not notice this on
previous firmware versions. Later this morning I'll reinstall
previous firmware and double check.
73,
Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Stewart Baker wrote:
Hi,
Since installing MCU 2.73. I have noticed that power on is
accompanied by a number of loud, rather unpleasant clicks/clunks
from the speaker.
73
Stewart G3RXQ
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
------------------------------------------------------------------------
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
------------------------------------------------------------------------
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
