Yes, adjusting the AGC Threshold made a significant difference in NR for me on CW. I was using 3 or 4 and now use 5 or 6. NR is not appropriate or helpful in all occasions but I use it more than before.
thanks! Gary W7TEA I started this thread and I have been watching the replies with interest. Dick's question about AGC settings piqued my interest and I did some additional research. First, Lyle Johnson's message here: http://n2.nabble.com/K3-AGC-Settings-Tutorial-td681120.html#a681120 does much to explain the AGC settings. Then, Fred KT5X's message here: http://n2.nabble.com/K3-AGC-settings-td395668.html#a395668 provided the inspiration to put the AGC configuration settings on the PF1 and PF2 buttons. Armed with this information, I spent an hour or so experimenting with AGC and Noise Reduction. I am pleased to say that I found a combination that has vastly improved my NR experience. The noise reduction is now working pretty darn well with a setting of F3-2. I won't go as far as to say its as good as the K2's (yet) but it's getting there. I urge you to do your own experimentation, but here are the settings I landed on: AGC THR = 7 AGC SLP = 12 AGC F = 100 Thanks, good luck, and please let me know if you come up with settings that work for you. 73, John, WA6L -- View this message in context: http://n2.nabble.com/Musings-on-Noise-Reduction-tp1626992p1650269.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
