I hear a click when KRX3 in CONFIG is set to either ATU or BNC.
BTW, you do not need to use BSET and then ANT to change between Main
and AUX for the sub receiver. You can do it with a HOLD of the RX ANT
button too.
73 and Merry Christmas
Greg
AB7R
On Dec 24, 2008, at 2:53 PM, Frank R. Oppedijk wrote:
Barry,
Thanks for your information.
Is the mechanical click when switching between MAIN and AUX also if
you have the CONFIG KRX3 set to ANT=BNC, or only when using ANT=ATU ?
According to Willis 'Cookie' Cooke, K5EWJ, the switching is in the
KAT3 only, and the KAT3 is of course out of the circuit when using
the BNC connector as the subreceiver's aux antenna input...
Thanks,
Frank PA4N
At 19:22 24/12/2008, Barry N1EU wrote:
Frank R. Oppedijk wrote:
>
> Should there be an audible relay click when toggling BSET ANT I
> between "MAIN" and "AUX"? When I do that, there is no relay click
> whatsoever...
>
Yes, there is definitely an audible mechanical click of a relay
when you
toggle between AUX and MAIN antenna for the subreceiver.
73,
Barry N1EU
--
View this message in context:
http://n2.nabble.com/K3-QRP-output-power-level-tp1745497p1778652.html
Sent from the Elecraft mailing list archive at Nabble.com.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
---
drs. ing. F.R. Oppedijk
Avista ICT Consultancy B.V.
Albert Schweitzerlaan 7
1277 BV Huizen
tel: 035 - 523 09 83
fax: 035 - 523 09 84
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
