Hi Jim Memories 0-9 are quick memories which are accessed by the commands M-V and then the keypad number. I have programmed each of those memories with each band 160 thru 6 metres so that I can change bands without having to use the up/ down button. I have also programmed the M1 thru M4 buttons to provide an additional four frequencies in each band. In fact you can program VFO A and VFO B separately so that in fact with all of the above I have up to nine frequencies (each with pre-programmed modes) quickly accessible for each band.
However I digress. To access memories 10 and upwards you simply press the M-V command and then rotate the VFO A knob to get to the memory number you require. To program a memory with the current VFO A frequency, mode and selectivity you need to use the V-M command and then either press the keypad number to be programmed (0 thru 9) or rotate VFO A for memories 10 and upwards to select the number you want and then press V-M again. I hope this helps. 73 Barry Simpson VK2BJ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
