Dick's suggestion is excellent.
You can stop and confirm your KDVR3 is working after you remount the K3 front panel and before you install the rest of the KRX3 (which goes inside the main K3 enclosure). Just don't enable the KRX3 in the MENU. The K3 will ignore the Aux DSP board you mounted in the front panel assembly until you do. Remember, you must install new firmware for the KDVR3! You must have at MCU ref 2.73 or later. Ron From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick Dievendorff Sent: Friday, January 02, 2009 11:44 AM To: 'G4MKP'; elecraft@mailman.qth.net Subject: RE: [Elecraft] KRX3 and KDVR - Installation Sequence Both option installations require that you remove and reinstall the front panel. If it were me, I'd install them at the same time and only remove and reinstall the front panel once. I'd go through the two Option Assembly manuals and see that the steps to remove and reinstall the front panel are quite similar. If you're at all uncomfortable with this, or want to verify that one is working before starting the other, then I'd do the KRX3 second receiver first. Dick From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of G4MKP Sent: Friday, January 02, 2009 11:30 AM To: elecraft@mailman.qth.net Subject: [Elecraft] KRX3 and KDVR - Installation Sequence My sub-receiver + filters and Voice recorder have been posted and are due any day. Grateful for any recommendations of the sequence for installation of these two. One other question; Is it/will it be possible to activate the DVR via RS 232? I'm thinking N1MM control and also a friend's logging application currently under development? Cheers, Terry G4MKP
_______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com