No problem Wayne. I always use 5W, and the LP-100A when I tune up my external ATU.
73 Stewart G3RXQ On Fri, 2 Jan 2009 10:01:08 -0800, wayne burdick wrote: > Stewart Baker wrote: > >> The K3 output was from ANT1 using the internal ATU. The ATU was >> automatically tuned to 1:1 on all bands. >> The results I got for 2:1 VSWR are as follows:- >> >> LP-100 K3 >> 160 1.99 1.8 >> 80 1.99 1.8 >> 60 1.99 1.8 >> 40 1.95 1.8 >> 30 1.97 1.6 >> 20 1.97 1.4 >> 17 1.97 1.3 >> 15 1.96 1.2 >> 12 1.96 1.5 >> 10 1.96 1.4 > > Much of this could be attributed to the different locations of the two > bridges (see my previous email). Strays will vary from band to band. > > Also, the K3's bridge will be a little more accurate at 100 W than at > 10 W due to the bridge diode drops. I compensate for this to some > degree in firmware, and I'll review it when I get a chance. > > 73, > Wayne > N6KR > > --- > > http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
