wayne burdick wrote: > > > > All RTTY issues noted, Dave -- thanks. > > > > Congratulations on your excellent showing! > > > > Wayne > > N6KR ++++++++++++++++++++++++ I use the 200 hz filter on RTTY all the time including the ARRL RTTY Round UP. I set up my 200 hz filter as a 300 hz filter in the config menu. I used DATA A and 1500 hz with the PWR setting cut back to about 40 watts which gave me about 80 watts on the meter but it seemed to work well for me until the power issue is fixed. I used MIXW and set up F12 to <ALIGN:1505> <CATCMD:k31;fw0030;k30;> <SPZOOM:4> Then I set up F8 to <CLEARTXWINDOW><CLEARRXWINDOW><CLEARQSO> <CATCMD:k31;fw4000;k30;> <SPZOOM:2> and F4 to SAVEQSO><CLEARTXWINDOW> <CATCMD:k31;fw4000;k30;> <SPZOOM:2> I have the 6 khz filter and could click on any signal in the wide spectrum than hit F12 and work them. The program even marks the stations I have already worked in RED on the water fall. I set up F1 to call and f2 to exchange. I am not much of a contester and only put in a few hours for a total of 58 contacts but the people I worked did not know that.If I had put in more time I know I could have done much better. 73 and hope this works well for other people. Ken W0CZ
_______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
