My understanding is that the LP-PAN for K2 is very close to release - perhaps Larry can provide the official word.
Jack Jim Campbell wrote: > Jack, > > I'm glad that you have instructions for adding the Z10000 to the K2, > because I looked around and couldn't find my translation of the German > instructions. By the way, the setup works just fine but I don't use it > too much. I'm waiting hopefully for the K2 version of LP-Bridge (?) so > that the frequency of the K2 would be shown on the PowerSDR scale. Any > news on LP-Bridge? > > 73, > > Jim - W4BQP > > Jack Smith wrote: > >> Jim: >> >> If you are going to extract an IF sample out of the K2, the Z10000 >> buffer amplifier can be installed inside the K2 with the internal >> installation option. This provides a convenient IF output with >> bandpass filtering, protected against short circuits on the IF sample >> port connector and with excellent isolation--around 100 dB reverse >> gain when installed according to the instructions provided with the >> Z10000 kit. >> >> There's an embarrassingly long manual with the details on installing >> the Z10000 inside a K2 at >> http://www.cliftonlaboratories.com/elecraft_k3_and_panadapters.htm >> >> Jack K8ZOA >> www.cliftonlaboratories.com >> >> >> Jim Campbell wrote: >> >>> Ron, >>> >>> I'm not familiar with the Conexant audio device. However, many >>> laptops do not have a stereo input such as a Line In. The microphone >>> input is usually mono. You are going to need the stereo/line-in >>> input in order to have the SDR work correctly. If you don't have >>> such an input on your laptop you will need an external USB audio >>> adapter. I am using the SoundBlaster X-Fi USB with my HP laptop. >>> As a side note, I have added the Clifton Labs buffer amplifier >>> (X-10000 ?) to my K2 and am using one of the SoftRock Lites tailored >>> for the K2 for a panadaptor. Yes, I realize that the K2 doesn't >>> provide an IF output, but I found that a K2-owner in Germany had >>> tapped in to the K2 IF and had published the description (in German, >>> naturally). I think I have a translation of the article around here >>> somewhere if anyone is interested. >>> >>> 73, >>> >>> Jim - W4BQP >>> K2 #2268 >>> >>> Ron Midwin wrote: >>> >>>> Fellow Elecraft enthusiasts, >>>> >>>> >>>> >>>> I just ordered the SoftRock Lite from Tony, KB9YIG, below. I would >>>> like to be able to observe whatever bandwidth I can around any band >>>> I am working on my K-3. Since this appears to be a compromise over >>>> the "Pan Adapter" that is available for ~$300, per Tony's suggestion >>>> I wonder if any of you have successfully tried this? And how does >>>> it work? FYI, I have an HP Pavilion dv9700 Notebook PC, AMD Turion >>>> X2 Mobile Technology TL-60 2.00 GHz, 2.00 GB Memory, 32 Bit Op >>>> System, with Vista. >>>> >>>> >>>> >>>> Not sure which sound card is built in. Driver is Conexant High >>>> Definition Smart Audio 221, if that helps. >>>> >>>> >>>> >>>> 73, >>>> >>>> >>>> >>>> RonAE6RH >>>> >>>> >>>> >>>> >>>> >>>> / / >>>> >>>> >>>> >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> Elecraft mailing list >>> Post to: [email protected] >>> You must be a subscriber to post to the list. >>> Subscriber Info (Addr. Change, sub, unsub etc.): >>> http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/subscribers.htm >>> Elecraft web page: http://www.elecraft.com >>> > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
