Jack and Ron, Sorry, but I was thinking about one thing and talking about another. I had also made some modifications to my K2 to allow me to drive a PTC-IIusb pactor modem. That modification is the one that was originally done by a German ham. So I was thinking about the pactor modification when talking about the panadapter modification. My only excuse is that my aging mind is easily confused.
Jack, question: Do you plan to offer an LP-Bridge program for the K2? 73, Jim - W4BQP Jack Smith wrote: > Jim: > > If you are going to extract an IF sample out of the K2, the Z10000 > buffer amplifier can be installed inside the K2 with the internal > installation option. This provides a convenient IF output with > bandpass filtering, protected against short circuits on the IF sample > port connector and with excellent isolation--around 100 dB reverse > gain when installed according to the instructions provided with the > Z10000 kit. > > There's an embarrassingly long manual with the details on installing > the Z10000 inside a K2 at > http://www.cliftonlaboratories.com/elecraft_k3_and_panadapters.htm > > Jack K8ZOA > www.cliftonlaboratories.com > > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
