Which program are you using? Did this ever work? What changes have you made since it worked?
The line out on the K3 is a low level line out and would sound attenuated compared to the level on the speaker/phones jack. You've got the level as high as it will go on the K3, swapped the audio cable for a known good one, time to start looking at the sound card and application settings on the computer. [email protected] wrote: > > > > I posted this Sunday bust since then I have been having email problems. > If you responded please send it again. > > > I am having a problem with receiving RTTY signals. It > worked before so I assume it is something I have set incorrectly. > > > There is no? display of any text or even jiberish on any of the RTTY > applications. No waterfall, nothing at all. I have tried different computers > and > multiple applications with the same results. I have adjusted the line out > item > in the config menu to full scale. I have replaced the cable between line out > and the computer. > > > I plugged headphones into the line out jack I can hear the > RTTY signal but it seems to be attenuated. Although I don't know how loud it > should be. I think it should be louder that it is. > > > > BTW: transmit doesn't work at all. That will be the > subject of another email. > > > Any help would be appreciated. > > > ? > > > Dave N1IX -- R. Kevin Stover, ACØH ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
