If you are plugging into a laptop, make sure the port is set to line in. Mine comes up and asks me, whenever I plug something in.
Dave Wilburn NM4M R. Kevin Stover wrote: > Which program are you using? > Did this ever work? > What changes have you made since it worked? > > The line out on the K3 is a low level line out and would sound > attenuated compared to the level on the speaker/phones jack. You've got > the level as high as it will go on the K3, swapped the audio cable for a > known good one, time to start looking at the sound card and application > settings on the computer. > > > [email protected] wrote: >> >> >> I posted this Sunday bust since then I have been having email problems. >> If you responded please send it again. >> >> >> I am having a problem with receiving RTTY signals. It >> worked before so I assume it is something I have set incorrectly. >> >> >> There is no? display of any text or even jiberish on any of the RTTY >> applications. No waterfall, nothing at all. I have tried different computers >> and >> multiple applications with the same results. I have adjusted the line out >> item >> in the config menu to full scale. I have replaced the cable between line >> out and the computer. >> >> >> I plugged headphones into the line out jack I can hear the >> RTTY signal but it seems to be attenuated. Although I don't know how loud it >> should be. I think it should be louder that it is. >> >> >> >> BTW: transmit doesn't work at all. That will be the >> subject of another email. >> >> >> Any help would be appreciated. >> >> >> ? >> >> >> Dave N1IX > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
