I don't know where to get better ones but I repaired the knobs that broke with 30 min epoxy and they worked for a while. I called Elecraft and they sent a set under warranty and I bought two more sets. They are not expensive, but the shipping and handling is, co I bought three new sets. My outer ring broke and while I was looking at it the inner knob broke also. Elecraft could do well if they found something better quality.
Willis 'Cookie' Cooke K5EWJ --- On Tue, 2/3/09, Ron Hinton <rjhin...@verizon.net> wrote: > From: Ron Hinton <rjhin...@verizon.net> > Subject: [Elecraft] K3 RF knob Broken > To: elecraft@mailman.qth.net > Date: Tuesday, February 3, 2009, 4:45 PM > Has anyone other then me had one of the inter knobs for the > RF or AF gain break? Came in, turned on the rig and reached > up and turned the RF gain down and low and behold the little > knob fell off the shaft. It was broken right where one of > the set screws was located. I see there is no brass bushing > in the knob for the setscrew to be threaded into. Do you > know where some better quality ones can be purchased? > > Ron > NA9F______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html